Advanced IP Scanner is a free network scanner that sweeps an IP range in seconds and lists every device it finds, along with MAC addresses, shared folders, and one-click access to remote control, Wake-on-LAN, and CSV export.
Advanced IP Scanner examines a local network and reports what is connected to it. Enter a range or let the tool detect the adapter's own subnet, press scan, and a table fills with every reachable host: IP address, device name, MAC address, and the hardware vendor behind it. From that list you can open a computer's shared folders, start an RDP or Radmin session, send a Wake-on-LAN packet to a sleeping machine, or shut a machine down remotely. Results can be saved as a CSV file for documentation, and the whole program runs without installation.
Advanced IP Scanner is built for the moment a network stops behaving: a printer that will not appear, an address conflict, a switch port that seems dead, or a device nobody recognizes on the guest subnet. A one-second scan usually answers the question faster than logging into a router and reading its client table, and the MAC vendor column often identifies an unknown box immediately. Administrators use it during rollouts to confirm which machines are online and reachable, and technicians use it on site visits to map an unfamiliar LAN. It is a diagnostic tool rather than a publishing or editing program, so a creative application such as 剪映专业版 sits in a different category entirely.
Advanced IP Scanner earns its place by turning a routine chore into a two-second step. Instead of interrogating a router's admin page or walking from desk to desk, a technician sees the whole subnet at once, with names, addresses, and vendors arranged in a sortable table that can be filtered and exported for the ticket. The remote actions are what save the most time, because the scan doubles as a launchpad: wake a machine, open its shares, or start a remote session from the same row you just read. Because it needs no installation, it can be carried on a memory stick and run from a machine that is not yours, which is exactly the situation where a small utility proves most valuable. It also works well as documentation, since a CSV snapshot gives a clear record of what the network looked like on a given day.
Key capabilities and highlights.
Advanced IP Scanner can be pointed at an address range or let it read the local subnet, and results appear within seconds rather than minutes. Multi-threaded scanning means a full class C range is practical to check during a support call or a site visit.
Each row shows the hostname, address, MAC address, and the vendor that owns the hardware prefix, which is often enough to identify an unlabeled device. The table can be sorted and filtered so a large scan stays readable.
Detected machines that publish shared folders can be opened straight from the scan list without typing a UNC path by hand. That removes a common source of typos when a support technician needs to reach a file server or an accounting PC quickly.
Where remote access is already permitted, the scan list can launch an RDP session or connect through Radmin, so a technician moves from discovery to fixing the problem without switching tools. Credentials and permissions still follow the usual remote-access rules.
Advanced IP Scanner can switch on machines that support wake-on-LAN before a maintenance window, and reachable computers can be shut down or restarted remotely. Both actions are useful for scheduled updates and for cutting power use after hours, without a separate management agent on each machine.
Scan results can be exported to a CSV file that opens in any spreadsheet, which makes it easy to keep a dated record of what was connected before a change. Those snapshots are useful evidence for audits and for troubleshooting later.
The program runs as a portable edition, so it can be kept on removable media and started on a borrowed or freshly imaged machine without changing that system. That suits consultants and technicians who work across several client sites.
Advanced IP Scanner is free to download and use, which makes it practical to deploy on every technician's machine rather than restricting it to a few licensed seats. It is one of the most widely used LAN discovery tools.
Browse historical releases and previous builds.
No old versions have been added yet.
Common questions about Advanced IP Scanner.
It scans an IP range on a local network and lists every device that responds, showing hostname, IP address, MAC address, and hardware vendor. From the same list it can open shared folders, start a remote session, wake a sleeping computer, or shut one down.
Yes, it is offered as a free tool rather than a time-limited trial, and no paid tier is needed to unlock the scanning features. Organizations that plan to standardize it across many machines should still review the terms of use before adding it to a managed toolkit.
The scanner works on the ranges you enter, so any address the machine can route to can be included in a scan. Devices behind a router on a different subnet often will not appear, because MAC-level discovery relies on protocols that stay inside a single broadcast domain.
Yes, a portable edition of Advanced IP Scanner is available alongside the installer, so it can run from a memory stick on a machine where you would rather not leave software behind. That makes it convenient for one-off diagnostics on client machines or shared computers.
Advanced IP Scanner can send wake-on-LAN packets to machines configured to accept them, and it can shut down or restart reachable computers where you hold the necessary rights. Both actions depend on the target machine's own settings and permissions, so hardware with wake-on-LAN disabled will simply stay asleep.
Advanced IP Scanner is a free network scanner that sweeps an IP range in seconds and lists every device it finds, along with MAC addresses, shared folders, and one-click access to remote control, Wake-on-LAN, and CSV export.
Power Automate for desktop is Microsoft's robotic process automation app for Windows. It builds low-code desktop flows that automate repetitive work across applications, websites, files, and email, and Power Automate for desktop can start from a button, a schedule, or an event.
PowerShell is an object-based command shell and scripting language for automating administration, managing systems, processing data, and building repeatable operational workflows.
The AppLocker Policy Converter is a Microsoft command-line utility that translates existing AppLocker policy files into App Control for Business policies, giving administrators a practical starting point for migrating away from the older application control feature.
The AppInstaller File Builder is a Microsoft tool from the MSIX Toolkit that generates .appinstaller files through a guided wizard, so packaged Windows apps can check a central location for updates and repair themselves without hand-written XML.
Comments